Construcciones Yamaro: Empire Global Constructions reaps the benefits of Coates’ shoring solutions

By

When building and construction company Empire Global Constructions encountered some unique challenges during its construction of a two-level basement for a high-end apartment complex in the ACT, it turned to the expertise of Coates Engineering Solutions.

Joe Tonkovic, Construction Manager at Empire Global Constructions and Philip Lord, Temporary Works Engineer at Coates discuss how an internal shoring system, featuring the installation of one of Australia’s largest double-acting hydraulic rams, kept the basement build on schedule.

The initial basement shoring design for the Emporium Apartments project specified the use of structural steel. However, this was not viable due to the close proximity of in-ground services and the inability to anchor below neighbouring properties. Recognising the importance of finding a dependable and cost-effective solution to uphold the project’s safety and integrity, Empire Global Constructions looked to Coates for help.

Having previously entrusted Coates for equipment hire solutions, Empire Global Constructions invited the company to deliver an alternative shoring solution.

“This project provided an opportunity for Coates to utilise its proprietary hydraulic struts and implement an internally braced solution,” says Lord. “These hydraulic struts enhance stability and reinforce the shoring system ensuring its integrity.”

Related stories:

Tonkovic describes the environmental factors project teams faced along the way as uniquely challenging.

“The stop-start rain and the amount of groundwater and rock that we had to deal with as we excavated the basement meant that we didn’t have the best start to this project,” says Tonkovic. “But these factors were out of our control and once we reached the bottom, we were able to move forward smoothly.”

Securing the struts to the piling presented initial challenges that required a prompt resolution.

“Being able to use core drilling to connect the hydraulic system to the capping beam was a key part of the planned installation process, but before this could happen the piling contractor needed to perform some additional design adjustments and analysis,” Lord explains. “Once we had approval, we were able to install the system without other issues or delays.”

Empire Global Constructions development site.
Empire Global Constructions’ development site.

Supporting high structural loads was a critical requirement due to the proximity of a sewer line and two neighbouring properties. To meet this demand, Coates Engineering Solutions introduced its new MP375 strut, which played a pivotal role in providing maximum support and stability across large spans.

The super heavy-duty MP375 strut has a load-bearing capacity of up to 375 tonnes, offering Empire Global Constructions the necessary assurance that the excavation could withstand the lateral loads.

Working in conjunction with Empire Global Constructions and consulting engineer Indesco, Coates successfully designed and implemented a robust hydraulic shoring solution that safely braced the basement structure during excavation.

“Recent shoring collapses in the ACT have highlighted the need for the assurance of a safe working environment,” says Lord. “Empire valued the safety of our off-the-shelf system and managed to adapt excavation to accommodate this approach.”

Equipment availability and speed of installation were also major benefits. “Not only did Empire avoid having to wait and pay the high price of steel, but they were able to access our system quickly to keep construction moving,” says Lord.

Tonkovic added: “Throughout this project, we found Coates to be very approachable and understanding of our requirements.”

“We also appreciated their ability to accommodate our lead time so we could get the props in place as soon as possible and minimise the time that we lost during excavation.”

The successful completion of the basement shoring project by Coates Engineering Solutions, in collaboration with Empire Global Constructions, showcases its expertise in delivering innovative and dependable temporary works solutions.

To explore further how Coates Engineering Solutions can elevate the cost-effectiveness, safety, and efficiency of diverse construction projects, visit its website at coates.com.au/engineering-solutions.

The post Empire Global Constructions reaps the benefits of Coates’ shoring solutions appeared first on Inside Construction.



View Source

Comments

Post a Comment

Popular posts from this blog

Ways to Keep your Privacy in a Balcony

By
Image
An apartment has no specific space to enjoy small reunions with friends and relatives out in the open, but if you are lucky enough to have a balcony, you will have an extra space with natural light. However, there is a downside because it does not grant you any privacy. It is not a good idea to shut this space down with some walls and a small window since it will interfere with the flow of air. There are several ways to enjoy a balcony and to have some privacy while you are at it, and Construcciones Yamaro gives you some ideas to do so: 1. -  Bamboo blinds : Bamboo is an ecofriendly element so is excellent for the environment, which is ideal to give a natural touch to this area . Bamboo blinds are easy to set because this is a light and flexible material. It will give you privacy and it will create a barrier to block sunrays, thus giving freshness to the rooms. 2. -  Plants : They are a great idea if you privacy fo
Read more

More About Materials: The Concrete Brick

By
Image
Concrete Bricks Construcciones Yamaro  is a company always aware about giving information about  construction  to its customers. The company provides details and  characteristics about the materials   used in every work the company does .  More than a  construction company , Construcciones Yamaro is an ally to its customers that work together to achieve big goals. For today’s article, Construcciones Yamaro has decided to continue with the presentation of some characteristics about other construction material:  the concrete b rick . The concrete brick is a construction material whose composition is based on  the Portland cement, sand, water and other additives . Usually, it is used to substitute cast cement in the construction of walls, footings and other structures. Uses of the concrete blocks The concrete brick can be usually find in  standard size pieces  which are  rectangular of 8 x 8 x 16 inch size  (20 x 20 40 cm approximately), and typically have about 3/8 inch (a
Read more

Construcciones Yamaro: Information about Productive Maintenance

By
Image
TPM Construcctiones Yamaro , committed to the  development of the construction sector  in Venezuela, explains what is important to know about  Total Productive Maintenance  in order  to optimize all processes and achieve efficiency  of all involved aspects in the construction sector. Total Productive Maintenance or TPM is a strategy  that includes a series of activities created by the  Japan Institute for Plant Maintenance  which helps to improve the competitiveness of an industry organization or services through improved personal strategy and the teams. What are the goals of TPM? Zero accidents. Zero defects in products and services. Zero losses in all departments. TPM only considers the staff to develop strategies? Implementing TPM to your company It is not mandatory to consider only the staff; as a global strategy, analysis of efficiency of machinery, equipment, tools and systems are also considered,  identifying the possible causes that may alter its optimu
Read more